QUAD PROCESSOR – WATCH ALL 4 CAMERA AT THE SAME TIME NO NEED TO SWITCH BETWEEN CAMERAS RECORD ALL 4 CAMERAS IN REAL TIME WITHOUT DELAY!
This 2.4 Ghz 4Ch Color, Night Vision Security Surveillance Camera system was built with the latest 2010 technology. It allows the longest wireless distance with high resolution night-vision camera and audio capability. Its a perfect system for home or business monitoring, Elder care, baby monitoring, residence security and surveillance, in the office, store, warehouse, hospital, factory, etc. With latest 2010 built In DVR technology record videos directly on your PC hard drive and monitor your cameras via internet from anywhere in the world. DUAL VIDEO ACCESS – Cameras can be connected via wire or access via wireless receiver.

Basic Specification of Reciever :
USB : 2.0
Receiving Frequency : 2.400GHz-2.483GHz
Frequency Tune PLL
Receiving Sensitivity 85dB
Video Output 75/1Vpp
Audio Output 10K/500mVpp
Video System PAL/NTSC/SECAM Compatible
Validity Distance 100m (Open area)
Auto Switch Output Widows Default is Switch once every 5 Seconds
Power adapter Input AC Power Frequency 50/60Hz
Voltage 100~240V Output DC Power 5V/1.5A
Power Consumption 8W
Outline Size 205 x 120 x 43mm
Weight 520g

Basic Specification of Camera :
Transmitting Frequency : 2.400GHz-2.483GHz
Image Device : 1/3 Omn Vision CMOS
Horizontal Definition : 380 TV Line
Angular Field of View : 45 (f=6mm)
TV System : PAL/NTSC
Validity Pixel : PAL : 628×582, NTSC : 510×492
Minimum Illumination : 0 Lux
Validity Distance : 100m (Open area)
Working Temperature : -10°C~50°C
Night vision distance : 10M

Whats in the box :
1 Reciver,
1 power adapter of receiver,
4 cameras,
4 power adapters of camera,
5 AV Cable,
1 USB Cable,
1 Manual cd,
1 Warranty card

4 Responses to “Wireless Security Camera System 2010 Latest Technology BUILD-IN DVR Infrared Surveillance (4) Quad View Quad Display 2.4ghz Night Vision Real Time Color”

1. Shanna Bermodes says:

   May 6, 2010 at 12:00 am

   This system is still NOT working. I contacted seller whom is “working with me” to correct this issue and has “promised” to make things right at no additional cost- still waiting and now at day 4. I was reserving judgment, but at this point I’m very frustrated and would like a refund. One of my cameras is not working at all, so the pictures of the remaining working cameras are impacted;blinking,unclear and sometimes not visable at all.
2. John M. Baynes says:

   April 12, 2010 at 12:00 am

   I hade to contact the distributor many times, five, before they would get back to me on a voltage question, then when they finally answered me, they answered me wrong. This is not Amazon.com’s fault, but the distributor’s fault. must be a small company,
3. Charles E. Heppehamer says:

   April 7, 2010 at 12:00 am

   I purchased these cameras after my dogs that stay in my back yard were poisoned with anti-freeze.

   Pros:

   Decent picture quality

   Night vision

   Easy set up

   Cons:

   IR LEDs glow dim red at night

   Cameras are very sensitive to interference causing a bad picture

   All cameras must be used. If only one is used the picture quality goes to unusable levels.

   When camera bases are mounted 90 degrees to cameras, you can not move the cameras side to side, only up and down.

   Overall I am very happy with the system. So far nothing of any importance has been captured but I feel better that there is always an eye watching my house.
4. Chaim Friedman says:

   March 9, 2010 at 12:00 am

   I bought this equipment for the surveillance of my home. I am evry pleased with this. Everything is in the box, The video quality is very good and the night vision is excellent. It is very easy to install and connect to internet, every step is detailed in the user manual. it took me like 2 hours the complete installation (I am not a person who ussualy do works like this).